Ordinary Heat Shrinkable Tube
Double Wall Heat Shrinkable Tube
High Temperature Heat Shrinkable Tube
Heat Shrinkable Marking Tube
Medium/Thick Wall Heat Shrinkable Tube
High Pressure Heat Shrinkable Tube
Anti-Slip Pattern Heat Shrinkable Tube
Teflon Tube/Silicone Tube
Bellows
Molded Heat Shrinkable Parts
Molded Special-Shaped Protective Box
Insulation Sealing Protective Tape
Product Model Comparison Table
Soft, high flame retardant
Shrinkage ratio: 2:1; 3:1
Working temperature: -55℃~+125℃
Shrinking temperature: 70℃~125℃
Executive standard: UL 224
Environmental standards: RoHS
Standard color: yellow and green stripes
product description:
The yellow-green heat shrinkable tube is made of environmentally friendly polyolefin material by two-color co-extrusion and radiation cross-linking modification processing. The products are soft, highly flame-retardant, bright and durable, and excellent physical, chemical and electrical properties. They are widely used in wire harnesses, ground wires in cables, or other special lines, pipe markings and other occasions.
Features:
Soft, high flame retardant
Shrinkage ratio: 2:1; 3:1
Working temperature: -55℃~+125℃
Shrinking temperature: 70℃~125℃
Executive standard: UL 224
Environmental standards: RoHS
Standard color: yellow and green stripes
Specification | Supply size (mm) | Size after shrinking(mm) | standard packaging (M/plate) | |
the inside diameter of | the inside diameter of | Wall thickness | ||
YEVA-2(Y/G)2:1 | ||||
Φ1.0 | 1.5±0.3 | ≤0.70 | 0.28±0.10 | 200 |
Φ1.5 | 2.0±0.3 | ≤0.90 | 0.30±0.10 | 200 |
Φ2.0 | 2.7±0.3 | ≤1.00 | 0.35±0.10 | 200 |
Φ2.5 | 3.1±0.3 | ≤1.30 | 0.36±0.10 | 200 |
Φ3.0 | 3.5±0.4 | ≤1.50 | 0.38±0.10 | 200 |
Φ3.5 | 4.0±0.4 | ≤1.80 | 0.40±0.10 | 200 |
Φ4.0 | 4.5±0.4 | ≤2.00 | 0.45±0.10 | 200 |
Φ4.5 | 5.0±0.4 | ≤2.30 | 0.45±0.10 | 100 |
Φ5.0 | 5.6±0.3 | ≤2.50 | 0.45±0.10 | 100 |
Φ6.0 | 6.5±0.4 | ≤3.00 | 0.50±0.10 | 100 |
Φ7.0 | 7.5±0.4 | ≤3.50 | 0.50±0.10 | 100 |
Φ8.0 | 8.5±0.5 | ≤4.00 | 0.55±0.10 | 100 |
Φ9.0 | 9.5±0.5 | ≤4.50 | 0.55±0.10 | 100 |
Φ10 | 10.5±0.5 | ≤5.00 | 0.55±0.10 | 100 |
Φ11 | 11.5±0.5 | ≤5.50 | 0.60±0.10 | 100 |
Φ12 | 12.5±0.5 | ≤6.00 | 0.60±0.10 | 100 |
Φ13 | 13.5±0.5 | ≤6.50 | 0.60±0.10 | 100 |
Φ14 | 14.5±0.5 | ≤7.00 | 0.65±0.10 | 100 |
Φ15 | 15.5±0.6 | ≤7.50 | 0.70±0.10 | 100 |
Φ16 | 16.5±0.6 | ≤8.00 | 0.70±0.10 | 100 |
Φ18 | 19.0±0.7 | ≤9.00 | 0.70±0.10 | 100 |
Φ20 | 22.0±0.7 | ≤10.00 | 0.75±0.15 | 100 |
Φ22 | 24.0±0.7 | ≤11.00 | 0.80±0.15 | 100 |
Φ25 | 26.0±0.7 | ≤12.50 | 0.90±0.15 | 50 |
Φ28 | 29.0±0.7 | ≤14.00 | 0.90±0.15 | 50 |
Φ30 | 31.5±0.7 | ≤15.00 | 0.95±0.15 | 50 |
Φ35 | 36.5±0.7 | ≤17.50 | 0.95±0.15 | 50 |
Φ40 | 41.5±0.7 | ≤20.00 | 1.00±0.20 | 50 |
Φ50 | 51.0±0.7 | ≤25.00 | 1.00±0.20 | 25 |
Φ60 | ≥61.0 | ≤30.00 | 1.10±0.20 | 25 |
Φ70 | ≥71.0 | ≤35.00 | 1.20±0.20 | 25 |
Φ80 | ≥81.0 | ≤40.00 | 1.30±0.20 | 25 |
Φ90 | ≥91.0 | ≤40.00 | 1.50±0.20 | 25 |
Φ100 | ≥100 | ≤50.00 | 1.65±0.20 | 25 |
Φ120 | ≥120 | ≤60.00 | 1.70±0.20 | 15 |
Φ150 | ≥150 | ≤75.00 | 1.70±0.20 | 15 |
Φ180 | ≥180 | ≤90.00 | 1.75±0.20 | 15 |
Project | Test Methods | Performance |
Tensile Strength | ASTM D 2671 | ≥10.4MPa |
Elongation at break | ASTM D 2671 | ≥300% |
Tensile strength after heat aging | 158℃,168 hours | ≥7.3MPa |
Elongation at break after heat aging | 158℃,168 hours | ≥100% |
Flame retardant | UL 224 VW-1 | Pass through |
Thermal shock | 250℃,4 hours | No cracks, no drips |
Breakdown strength | ASTM D 150 | ≥15KV/mm |
Longitudinal shrinkage | UL224 | -5%~+5% |
Volume resistivity | ASTM D 876 | ≥10^14Ω.cm |