Ordinary Heat Shrinkable Tube
Double Wall Heat Shrinkable Tube
High Temperature Heat Shrinkable Tube
Heat Shrinkable Marking Tube
Medium/Thick Wall Heat Shrinkable Tube
High Pressure Heat Shrinkable Tube
Anti-Slip Pattern Heat Shrinkable Tube
Teflon Tube/Silicone Tube
Bellows
Molded Heat Shrinkable Parts
Molded Special-Shaped Protective Box
Insulation Sealing Protective Tape
Product Model Comparison Table
Shrinkage ratio: 3:1
Shrinking temperature: 75℃~120℃
Working temperature: -55℃~125℃
Withstand voltage rating: 600V
Executive standard: UL 224
Environmental standards: RoHS
Standard colors: black, white, red, yellow, blue, green (other colors can be produced on demand)
product description:
The 3 times shrinkage halogen-free flame-retardant heat-shrinkable tube is made of radiation cross-linked polyolefin material. It has excellent physical, chemical and electrical properties. Its main function is electrical insulation of connectors, anti-corrosion and rust prevention of solder joints, mechanical protection and wiring harnesses. It is widely used in electronics, Electrical appliances, communications, machinery and equipment, automobiles, ships, airplanes and other industries.
Features:
Shrinkage ratio: 3:1
Shrinking temperature: 75℃~120℃
Working temperature: -55℃~125℃
Withstand voltage rating: 600V
Executive standard: UL 224
Environmental standards: RoHS
Standard colors: black, white, red, yellow, blue, green (other colors can be produced on demand)
Specification | Supply inner diameter (mm) | After full contraction(mm) | Standard length (M/plate) | ||
Mm | inch | the inside diameter of | Wall thickness | ||
1.5/0.5 | 1/16 | ≥1.6 | ≤0.5 | 0.45±0.10 | 200 |
3.0/1.0 | 1/8 | ≥3.2 | ≤1.0 | 0.55±0.10 | 200 |
4.5/1.5 | 3/16 | ≥4.8 | ≤1.5 | 0.60±0.10 | 100 |
6.0/2.0 | 1/14 | ≥6.4 | ≤2.0 | 0.65±0.10 | 100 |
9.0/3.0 | 3/8 | ≥9.5 | ≤3.0 | 0.75±0.15 | 50 |
12/4 | 1/2 | ≥12.7 | ≤4.0 | 0.80±0.15 | 50 |
18/6 | 3/4 | ≥19.1 | ≤6.0 | 0.90±0.15 | 50 |
24/8 | 1 | ≥25.4 | ≤8.0 | 1.00±0.15 | 25 |
30/10 | 1-1/4 | ≥31.8 | ≤10.0 | 1.15±0.20 | 25 |
39/13 | 1-1/2 | ≥39.0 | ≤13 | 1.25±0.20 | 25 |
50/16 | 2 | ≥50.8 | ≤16 | 2.50±0.20 | 25 |
60/20 | 2-1/2 | ≥60 | 20 | 2.60±0.20 | 25 |
70/23 | 3 | ≥70 | ≤23 | 2.60±0.20 | 25 |
80/26 | 3-1/4 | ≥80 | ≤26 | 2.60±0.20 | 25 |
90/30 | 3-3/4 | ≥90 | ≤30 | 2.60±0.20 | 25 |
100/33 | 4 | ≥100 | ≤33 | 2.60±0.20 | 25 |
Special specifications and cut pipes can be produced as required
Project | Test Methods | Typical data |
Tensile Strength | ASTM D 2671 | ≥10.4MPa |
Elongation at break | ASTM D 2671 | ≥300% |
Longitudinal shrinkage | UL 224 | ±5% |
Tensile strength after heat aging | 158℃,168 hours | ≥7.3MPa |
Elongation at break after heat aging | 158℃,168 hours | ≥100% |
Thermal shock | UL 224 250℃/4 hours | No cracks, no drips |
Flame retardancy VW-1 | ASTM D 2671 Method C | Pass through |
Breakdown strength | IEC243 | ≥15KV/mm |
Volume resistivity | IEC93 | ≥10^14Ω.cm |