HB1518 elastic waterproof tape is a composite insulating waterproof tape with a radiation vulcanized base material. It has a tough and wear-resistant tape base and is suitable for repairing all kinds of cables, especially the sheath of mining cables.

product information

Specification: 1.8mm (thickness) × 50mm (width) × 3m (length)

Colour: Black

Appearance: double-layer structure, in rolls

Working conditions: -40℃～100℃

Packing specification: 50 rolls/carton

Product Features

1. Double-layer structure, composed of high-performance elastic insulating material and waterproof sealant.

2. The base material adopts full vulcanization technology, which will never crack.

3. Good elasticity, easy to stretch and wrap, easy to wrap irregular joints, forming a squeezing and shrinking effect.

4. Excellent weather resistance, water resistance and sealing performance.

5. It has excellent bonding properties to copper, aluminum and cable sheathing materials.

6. The construction signs are clear and the operation is simple.

7. It is resistant to ultraviolet rays and various media (sea water, acid and alkali, etc.).

8. The tape has good flexibility, and the repairability of the cement can provide good moisture resistance.

Scope of application

1. The intermediate joints of cold and heat shrinkable cable accessories are used together.

2. Waterproof, sealing and protection of overhead insulated wires.

3. Waterproof sealing of the ground wire.

4. 380V～220kV cables (power, communication, signal control), and the outer sheath of mining cables are quickly repaired.

Instructions for use

Clean the surface of the bonded object to ensure that there is no dust, oil, etc., stretch the tape to make the oval on the surface of the substrate layer become a perfect circle, and then stick one end of the tape to the cable to be protected, keeping the base at all times Under the premise that the pattern on the surface of the material layer is a perfect circle, perform a 1/2 overlap winding on the cable. While winding, remove the release paper and press the end of the tape to better bond to the cable sheath.