Product
Ordinary Heat Shrinkable Tube
Double Wall Heat Shrinkable Tube
High Temperature Heat Shrinkable Tube
Heat Shrinkable Marking Tube
Medium/Thick Wall Heat Shrinkable Tube
High Pressure Heat Shrinkable Tube
Anti-Slip Pattern Heat Shrinkable Tube
Teflon Tube/Silicone Tube
Bellows
Molded Heat Shrinkable Parts
Molded Special-Shaped Protective Box
Insulation Sealing Protective Tape
Product Model Comparison Table
Working temperature: -55℃ ~ +110℃
Shrinking temperature: 80℃~ 130℃
Anti-tracking, anti-ultraviolet; coated with weather-resistant sealant, excellent sealing performance
Environmental standards: RoHS
Shrinkage ratio: 2:1
Standard color: iron red
product description:
The heat-shrinkable umbrella skirt is made of tracking-resistant polyolefin material, coated with tracking-resistant and weather-resistant sealant. Dedicated to power cable terminal accessory joints.
Features
Working temperature: -55℃ ~ +110℃
Shrinking temperature: 80℃~ 130℃
Anti-tracking, anti-ultraviolet; coated with weather-resistant sealant, excellent sealing performance
Environmental standards: RoHS
Shrinkage ratio: 2:1
Standard color: iron red
| Model specification | Inner diameter of small end (mm) | Large end diameter (mm) | Adhesive layer height (mm) | Thickness(mm) ±10% | |
| Supply inner diameter | Inner diameter after contraction | ||||
| YEVA-AS 35/12 | ≥35 | ≤12 | 95 | 18 | 3.0 |
| YEVA-AS 48/20 | ≥48 | ≤20 | 120 | 20 | 3.0 |
| YEVA-AS 60/25 | ≥60 | ≤25 | 140 | 25 | 3.0 |
| YEVA-AS 75/30 | ≥75 | <30 | 140 | 30 | 3.0 |
| YEVA-AS 100/35 | ≥100 | ≤35 | 140 | 30 | 3.0 |
| Project | Test Methods | Typical data |
| Tensile Strength | ASTM D 2671 | ≥13MPa |
| Elongation at break | ASTM D 2671 | ≥400% |
| Thermal aging tensile strength | ASTM D 2671(120℃/168hrs) | ≥10.8MPa |
| Thermal aging elongation at break | ≥300% | |
| Electric carbon tracking resistance | ASTM D 2303 (3.75KV, 1 hour) | pass through |
| Breakdown strength | IEC 243 | ≥20KV/mm |
| Volume resistivity | IEC 93 | ≥10^14Ω.cm |
| Flame resistance (oxygen index) | IEC 93 | ≥25 |
| Water absorption | ISO 62 | ≤0.5% |
| Cold bending test | ASTM D 2671 (-40°C, 4 hours) | No cracking |
| Copper corrosivity | ASTM D 2671 (120°C, 168 hours) | Does not corrode |