Product

Ordinary Heat Shrinkable Tube

Double Wall Heat Shrinkable Tube

High Temperature Heat Shrinkable Tube

Heat Shrinkable Marking Tube

Medium/Thick Wall Heat Shrinkable Tube

High Pressure Heat Shrinkable Tube

Anti-Slip Pattern Heat Shrinkable Tube

Teflon Tube/Silicone Tube

Bellows

Molded Heat Shrinkable Parts

Molded Special-Shaped Protective Box

Insulation Sealing Protective Tape

Product Model Comparison Table

Heat shrink one finger cot YEVA-CFT

Working temperature: -55℃~+110℃

Shrinking temperature: 70℃~130℃

Good UV resistance

Environmental standards: RoHS

Standard color: black

product description:

The heat-shrinkable finger sleeve is made of radiation cross-linked polyolefin material, coated with sealant, and has the characteristics of rapid shrinkage, insulation, and good sealing performance. It is applied to the connection of different specifications of cable joints and the sealing protection of other high variable diameter conversion parts.

Features:

Working temperature: -55℃~+110℃

Shrinking temperature: 70℃~130℃

Good UV resistance

Environmental standards: RoHS

Standard color: black

SpecificationLarge end inner diameter (mm)Inner diameter of small end (mm)Length before/after shrinking ±10%Wall thickness after shrinking ±10%
Supply sizeAfter shrinkingSupply sizeAfter shrinkingTotal lengthFinger lengthMain bodyFinger
YEVA-CFT(45/15-15/5)4515155110/13045/452.82.8
YEVA-CFT(85/42-15/5)8542155110/13045/452.52.8
YEVA-CFT(60/30-45/10)60304510125/13555/552.64.4
YEVA-CFT(100/52-20/8)10052208150/17555/653.03
YEVA-CFT(150/92-14/5)15092145130/15055/553.53.5
YEVA-CFT(160/92-60/20)160926020125/14535/553.03.2
YEVA-CFT(160/92-100/45)1609210045125/15035/553.53.2


ProjectTest MethodsTypical data
Outer technical indicators
Tensile StrengthASTM D 2671≥13.5Mpa
Elongation at breakASTM D 2671≥300%
Thermal aging tensile strength(120°C/168 hours)ASTM D 2671≥10Mpa.
Thermal aging elongation at break(120°C/168 hours)≥250%
Breakdown strengthIEC 243≥15kV/mm
Volume resistivityIEC 93≥10^13Ω.cm
Water absorptionISO 62≤0.5%
Technical index of inner layer hot melt adhesive
Softening PointASTM E 2880±5
Peel strength (PE)ASTM D 1000≥120N/25mm
Peel strength (AL)ASTM D 1000≥80N/25mm
Water absorptionASTM D 570≤0.5%


Industry Application