Ordinary Heat Shrinkable Tube
Double Wall Heat Shrinkable Tube
High Temperature Heat Shrinkable Tube
Heat Shrinkable Marking Tube
Medium/Thick Wall Heat Shrinkable Tube
High Pressure Heat Shrinkable Tube
Anti-Slip Pattern Heat Shrinkable Tube
Teflon Tube/Silicone Tube
Bellows
Molded Heat Shrinkable Parts
Molded Special-Shaped Protective Box
Insulation Sealing Protective Tape
Product Model Comparison Table
Shrinkage ratio: 3:1
Working temperature: ﹣45℃~110℃
Shrinking temperature: 70℃~125℃
Environmental protection standard: RoHs
Standard color: black (other colors can be customized)
product description:
YEVA-RA2 mid-wall heat-shrinkable tube is composed of an outer layer of semi-hard polyolefin and an inner layer of hot melt adhesive, which has good insulation, sealing, waterproof, impact resistance and abrasion resistance. Mainly used in the sealing and insulation protection of middle and low voltage cable terminals or intermediate connections, as well as other working environments that require anti-corrosion, moisture-proof, wear-resistant, and mechanical protection.
Features
Shrinkage ratio: 3:1
Working temperature: ﹣45℃~110℃
Shrinking temperature: 70℃~125℃
Environmental standards: RoHs
Standard color: black (other colors can be customized)
Model specification | Supply inner diameter (mm) | Size after fully shrinking (mm) | Tube type | Standard length (mm) | |
Inner diameter | Wall thickness | ||||
YEVA-RA2 8/2 | ≥8.0 | ≤2.0 | 1.5±0.25 | O | 1000-1220 |
YEVA-RA2 9/3 | ≥9.0 | ≤3.0 | 1.6±0.25 | O | 1000-1220 |
YEVA-RA2 12/3 | ≥12 | ≤3.0 | 1.6±0.25 | O | 1000-1220 |
YEVA-RA2 16/5 | ≥16 | ≤5.0 | 1.8±0.30 | O | 1000-1220 |
YEVA-RA2 19/5 | ≥19 | ≤5.0 | 1.8±0.30 | O | 1000-1220 |
YEVA-RA2 22/6 | ≥22 | ≤6.0 | 2.0±0.30 | O | 1000-1220 |
YEVA-RA2 25/6 | ≥25 | ≤6.0 | 2.3±0.30 | O | 1000-1220 |
YEVA-RA2 28/6 | ≥28 | ≤6.0 | 2.3±0.30 | O | 1000-1220 |
YEVA-RA2 33/8 | ≥33 | ≤8.0 | 2.3±0.35 | O | 1000-1220 |
YEVA-RA2 35/10 | ≥35 | ≤10.0 | 2.3±0.35 | O | 1000-1220 |
YEVA-RA2 40/12 | ≥40 | ≤12.0 | 2.3±0.35 | O | 1000-1220 |
YEVA-RA2 45/12 | ≥45 | ≤12.0 | 2.3±0.35 | O | 1000-1220 |
YEVA-RA2 55/16 | ≥55 | ≤16.0 | 2.5±0.35 | O | 1000-1220 |
YEVA-RA2 65/19 | ≥65 | ≤19.0 | 2.6±0.35 | O | 1000-1220 |
YEVA-RA2 75/22 | ≥75 | ≤22.0 | 2.6±0.40 | O | 1000-1220 |
YEVA-RA2 85/25 | ≥85 | ≤25.0 | 2.8±0.40 | O | 1000-1220 |
YEVA-RA2 95/25 | ≥95 | ≤25.0 | 2.8±0.40 | O | 1000-1220 |
YEVA-RA2 115/34 | ≥115 | ≤34.0 | 3.1±0.40 | O | 1000-1220 |
YEVA-RA2 140/42 | ≥140 | ≤42.0 | 3.3±0.40 | O | 1000-1220 |
YEVA-RA2 160/50 | ≥160 | ≤50.0 | 3.3±0.40 | O | 1000-1220 |
YEVA-RA2 180/58 | ≥180 | ≤58.0 | 3.3±0.40 | O | 1000-1220 |
YEVA-RA2 200/65 | ≥200 | ≤60.0 | 3.3±0.40 | O | 1000-1220 |
YEVA-RA2 235/65 | ≥235 | ≤60.0 | 3.3±0.40 | O | 1000-1220 |
YEVA-RA2 265/75 | ≥265 | ≤75.0 | 3.7±0.40 | O | 1000-1220 |
YEVA-RA2 300/75 | ≥300 | ≤75.0 | 3.7±0.40 | O | 1000-1220 |
YEVA-RA2 350/100 | ≥350 | ≤100.0 | 4.0±0.40 | O | 1000-1220 |
YEVA-RA2 380/150 | ≥380 | ≤150.0 | 4.0±0.40 | O | 1000-1220 |
YEVA-RA2 410/150 | ≥410 | ≤150.0 | 4.0±0.40 | O | 1000-1220 |
project | Test Methods | Typical data |
Outer technical indicators | ||
Tensile Strength | ASTM D 2671 | ≥13.5MPa |
Elongation at break | ASTM D 2671 | ≥400% |
Tensile strength after aging | ASTM D 2671(150℃/168hrs.) | ≥11MPa |
Elongation at break after aging | ≥200% | |
Longitudinal shrinkage | UL 224 | 0~-10% |
Breakdown strength | IEC 60243 | ≥20KV/mm |
Volume resistivity | IEC 60093 | ≥10^14Ω.cm |
Copper stability | ASTM D 2671 | pass through |
Water absorption | ISO 62 | <0.2% |
Hot melt adhesive technical indicators | ||
Water absorption | ISO 62 | ≤0.2% |
Softening Point | ASTM D E28 | 85±5℃ |
Peel strength (AL) | DIN 30672 | 80N/25mm |
Peel strength (PE) | DIN 30672 | 120N/25mm |